established May 1989
U.L. & Fire Rated
School & Hospital		 www.SchoolPagingSystems.com
 Innovative Paging & Sound Reinforcement Equipment
a division of www.AVLELEC.com
Direct Line: 303 816 1781
Office: 303 569 6776 ext 103 * Fax: 303 679 8949
email: Wanita.Savage@SchoolPagingSystems.com		 a
Global
iNet Company
 Client Listing

                                                 

Call-In

CA10A CA11A CA15C CA17 CA19 CA21B

           The Bogen Call-In Switches are attractive, functional units for call-in from classrooms or other staff locations to the PI35A and SI35A Intercom Systems,              Multi-Graphic© Series 115B, 2223, and 2233 Institutional/School Communication Systems, and Multicom 2000® Administrative Communication Systems.

 

High-Powered

Intercom
 

Model PI35A

  

The Bogen PI35A is an executive communications console completely designed to meet high power paging and intercom requirements. The PI35A provides instantaneous intercommunication and background music (or other program) distribution facilities for up to 25 speaker-equipped stations. A 20-watt intercom amplifier features a frequency response that has been shaped for maximum intelligibility. A 35-watt program amplifier ensures that program material and/or emergency announcements are clearly heard and easily understood. Complete facilities are provided for distributing program material from microphones, CD player or other background music source. Distribution is accomplished by simple push-button selection, following the color-coded guidelines.

  
   

Multi-Graphic®

Desktop Control Center

  
 

The SI35A provides fast, reliable, and efficient intercommunication and tone signaling in small to medium-sized schools. The SI35A provides a 20-watt intercom amplifier to permit instant intercommunication with any speaker-equipped location, and a separate 35- watt program amplifier for simultaneous distribution of program material to other rooms or locations. The system also features an emergency page capability for emergency announcements to all stations at once. The SI35A provides complete facilities for distributing a variety of program materials from optional equipment such as microphones, CD player-AM/FM receiver, or other background music source. Selection of program material, as well as its distribution to selected rooms is accomplished with simple push-button program selection and by following the color-coded guidelines.

  
Ceiling Speakers  
S86 Image

S86T725PG8WVK
SM4T Image

Bogen’s Ceiling Speaker Assemblies consist of an 8" Cone Speaker (S86 or S810) pre-assembled onto a 13" steel ceiling grille painted with off-white (PG8W) or bright white (PG8U) enamel. Options for these assemblies are recessed volume control (VR), volume control with knob (VK), and rear-mounted screw terminal strip for power taps (BR

The Bogen SM1EZ and SM4T Easy Install® Speakers are surface-mount speakers, designed to typically install in less than a minute. Installation is a simple, three-step process that does not require tools. First, two specially-designed studs pierce the ceiling tile. Second, two custom-designed wing nuts secure the speaker to the ceiling. Third, standard wire nuts make the electrical connection directly to the color-coded studs. Both the SM1EZ and SM4T are lightweight, durable speakers with a low-profile contemporary design, making them versatile enough to be installed in just about any installation with standard ceiling tiles.

The SM1EZ is a 1-watt single-tap speaker. The SM4T is a 4-watt multi-tap speaker with a rotary switch that eliminates transformer tap wires. Both models have an exterior volume control for easy balancing that is easily accessible, but doesn’t attract tampering

25-Key Station Selector Panel for SI35A

 
SBA225 - 25-Key Station Selector Panel for SI35A
The Bogen Models SBA225 and SBA325 Room Selector Panels are designed for use with Bogen Multi- Graphic® and Multicom 2000® Systems.The SBA225 is also used in Bogen’s PI35A and SI35A Power Intercom systems. These panels provide call annunciation (using LEDs) and tone signal in addition to room selection. The panels use three position, four-pole lever-action switches with positive detents. In the SBA225, these switches are used to selectively connect up to 25 speaker-equipped locations to either a PROGRAM, OFF or INTERCOM channel. In the SBA325, the switches selectively connect up to 25 speaker-equipped locations to either a PROGRAM–A, OFF, or PROGRAM– B channel. The INTERCOM channel is selected by means of separate push on/off switches. Channels are clearly identified with color-coded guidelines in accordance with the Multi-Graphic operating method. Calls from staff stations are initiated by a momentary depression of a call origination switch, which lights the corresponding LED on the selector panel and sounds a tone signal to bring attention to the call. The LED remains “on” until the call is acknowledged, at which time it is automatically cancelled. The room selector panels permit maximum room selection to be accommodated in a minimum of space. Each selector panel also has provisions for accommodating the add-on Bogen Model TZMA Time Zone Module Adapter, providing up to six zones of time signalling, and/or the Model SCR25A Call-In Module, providing the circuits necessary when using call origination switches which do not contain silicon-controlled rectifiers. The room selector panels are designed to provide years of unfailing trouble-free operation. The switches are ruggedly constructed to withstand heavy usage and are designed with positive detents to assure proper positioning. Lever switches are self-wiping to prevent erratic operation, and precious metal contact surfaces ensure low contact resistance and consistent operating reliability. Switch handles are permanently affixed to the switch shafts, eliminating troublesome replacement problems. Further assurance of trouble-free operation is provided by the LEDs, which are designed to give years of efficient service.
  
 

Call-In & Time

Zone Modules

  

Models SCR25A & TZMA

  
 

SCR25A

The Bogen Model SCR25A Call-In Module is an annunciator latching control bank designed for use with room selector panels in Bogen Multi-Graphic® systems. The SCR25A provides 25 silicon controlled rectifiers (SCR) and permits the use of momentary switches without SCRs. The silicon controlled rectifiers provide annunciator latching, keeping the appropriate LED annunciator lamp on the room selector panel illuminated until the call is acknowledged.

TZMA

The Bogen Model TZMA Time Zone Module is designed for use with room selector panels in Bogen Multi-Graphic systems. The module allows each circuit of the room selector panel to be programmed to any of six zones for time signaling. Each module provides 25 six-position DIP switches for zone programming, as well as ultra-reliable relays

designed for over 1,000,000 trouble-free operations.

  
-   

• Adds a second program channel to Bogen Series 2233 Communication systems

• Provides in/out for two microphones and an auxiliary program source

• Selective monitoring of A or B channel

• Matches the color-coded operating system for Bogen Multi-Graphic equipment

• UL listed